Here is an uncomfortable observation from the sorting bench. A heat-treatment supplier of mine passed its VDA 6.3 audit in spring with two minor findings, both documentary. By October, Monday-morning parts were failing hardness at first article – every Monday, eleven weeks running, until the furnace found its temper again around Tuesday lunch. The furnace log held the confession: zone 3 had been running 14 °C cooler since June. Nobody in their engineering had approved it, because nobody in their engineering had been told. Controlling had booked it as an energy saving. In their ledger it was a utility line item. In mine it was an unnotified process change, with a PPAP certificate stapled to a process that no longer existed.
This is no longer a fringe scenario. The trade press is asking, straight-faced, how pharmaceutical glass suppliers are adapting to Europe's energy crisis; steel and chemical producers talk openly about re-engineering melt schedules and consolidating batches around the tariff curve. Every one of those adaptations lands in a process parameter somewhere. This is a change-control problem, not an energy one: where the money hides, why the notification clause is structurally blind to it, and what catches the drift before the escape does.
Where the energy money hides in the parameters
Energy cost never announces itself as a quality decision. It arrives as a setpoint here, a timer there. Across two decades in automotive and aerospace, and in FOREAST consulting for ArcelorMittal – where the megawatt price is a first-order cost driver – I learned to read a tariff curve the way I read a control chart. At an energy-intensive producer, a change in the price of a megawatt is a change in the process, whether anyone files a form or not. The usual hiding places:
- Furnace and oven zone temperatures trimmed 10–20 °C. Hardness and case depth drift toward the low limit, grain structure loosens, porosity creeps up. All in spec. All moving.
- Curing and bake times stretched to consolidate batches. Under-cure at the core of thick sections; adhesion that passes a pull test in November and fails in a humid March.
- Plating and anodising current density reduced. Coating thickness thins toward the LSL, salt-spray life quietly halves, and the certificate still quotes the old amps.
- Weekend cold startups. Monday microstructure, condensation on cold tooling, incomplete degassing – first-hour scrap booked as normal variation.
Why your change-notification clause never sees it
Read any standard change-notification clause in any PPAP manual on my shelf. Tooling, material, sub-tier, location, design change, packaging. Utilities do not appear. Not once. The clause assumes a change has an author, a form and an approval date. An energy-driven retune has a budget line and a bonus attached.
The change lives in facilities and controlling, not in engineering. The plant energy manager trims a setpoint, controlling books the saving, and the supplier's own quality organisation believes nothing has changed – same part number, same drawing, same work instructions. The setpoint sits in the PLC, not in the control plan, so as far as the system is concerned the frozen process is intact. At WITTE, most of the supplier escalations I had to de-escalate were not carelessness. They were bookkeeping – changes real in the plant, invisible in the system.
What catches it before your customer does
Four lines of defence, in rising order of cost.
Incoming SPC on energy-sensitive characteristics. Not certificate archiving – trending. Running supplier surveillance across a multi-site operation of more than 2,000 people, I learned that drift is audible weeks before the escape. At SNOP we caught zinc-plated brackets this way: coating thickness mean sliding about 0.4 µm a month, visible at week six, three weeks from breaching the LSL. The supplier had cut plating current density by eight per cent as an energy measure; their quality manager saw our chart before he saw his own. Six weeks of stock went on hold and nothing escaped. Trend what arrives instead of inspecting it harder – that discipline is most of how we cut defect costs by 70% there.
Certificate review with teeth. Compare actuals to nominal, not just to limits. A heat-treat certificate quoting hardness numbers identical to last quarter's, month after month, is not reassurance. It is a copy-paste until proven otherwise.
Audit questions aimed at the blind spot. Ask directly: what is your current energy-reduction programme, and which declared process parameters has it touched? Then put the same question to the facilities manager and the quality manager separately. The gap between their answers is the finding.
The contractual fix. Write energy input into the control plan as a process characteristic – declared zone setpoints, kW per batch, ramp rates, batch consolidation rules – with notification and requalification triggers identical to any other parameter. Put utilities on the process flow and into the PFMEA, and rate the failure modes like any other input. If the furnace is a special process, the electricity bill is audit evidence.
The cheapest process change your supplier ever made is the one you were never told about.
Key takeaways
- Declare energy as a process input – zone setpoints, kW per batch, ramp rates, batch consolidation rules – in the control plan, with notification and requalification triggers.
- Trend incoming SPC on energy-sensitive characteristics weekly; mean drift and Monday first-article scrap are the early signal, specification limits are the late one.
- Add one audit question: which declared process parameters has your energy-reduction programme touched? Ask facilities and quality separately, and compare the answers.
- Review certificates against nominal, not just limits, and pull the utility bill into the audit evidence pack alongside the control plan.
Capability is a snapshot. The process is a film that keeps shooting whether or not anyone files a form. A supplier under energy pressure will retune something; the only open question is whether you learn it from a trend chart or from a customer's containment request. Right now, across Europe, furnaces are being throttled. The PPAPs are not.